RSPRO Car And Van Rear Bumper Protector / Saver

INSTALLATION TIPS:

1. Don't install it on a cold environment. We recommend installing it at room temperature. Below 20ºC (68F) the material and glue tend to get rigid, so it would make the installation more difficult.
2. Thoroughly clean the bumper and use alcohol or similar for a perfect clean.
3. Before starting, place the product and move it around to make sure where you want to install it and use a pencil if needed to mark the right placement.
4. The front flap of the packaging is designed to be used as a sustainable squeegee. Tear it, fold it and you’ll use it as a traditional squeegee.
5. Remove the central part of the adhesive backing and stick it at the centre of the bumper.
6. Start applying one side applying pressure and using the squeegee to remove air. Then the other side.

If you need to remove it in the future, we advise applying some heat with a hairdryer or heat gun to soften the adhesive and make it easier to remove.